Termometru digital pentru verificare A/C

Interfata diagnoza ELM327 v1.3a

Cea mai populara interfata pentru diagnoza prin OBD II

Pret: 185,00RON

Tester diagnoza Launch X431 Super Scanner

Acoperire totala a marcilor Europene, Asiatice si Americane.

Garantie 2 ani si servicii postgarantie prin reprezentanta Launch Europe.

Pret: 10.000,00RON

Tester diagnoza Launch X431 Super Scanner

Interfata multiprotocol OBD-DIAG 4000

Pret: 475,00RON

ScanGauge II - Calculator de bord 3-in-1

Calculator de bord

Afisaje digitale

Echipament de diagnoza

Pret: 675,00RON

ScanGauge II - Calculator de bord 3-in-1

Tester si simulator senzori auto

Puteti testa daca un senzor este defect fara a-l schimba

Simulati un senzor ori semnal din masina

Un produs esential in diagnoza auto!

Va ajuta sa salvati timp si bani!

Pret: 710,00RON

Interfata ElmScan 5 Compact

Diagnoza universala prin OBD II

Interfata diagnoza originala fabricata in SUA.
Suporta toate protocoalele OBD II, inclusiv CAN.

Pret: 280,00RON

CATEGORII PRODUSE

Diagnoza auto prin OBD 2

Diagnoza auto diverse marci

Cabluri si conectori diagnoza

Diagnoza profesionala

Echipamente si scule service

Manuale intretinere si service

Tacho, imobilizer, chei

Programe diagnoza auto

CHIP TUNING

Diverse

NOUTATI

Opel Scanner CAN 2.0.1.10 A aparut versiunea 2.0.1.10 cu noi functionalitati adaugate si probleme rezolvate. Clientii nostri sunt rugati sa ne contacteze pentru versiunea in limba romana.

Detalii...

moDiag Expert

Acum in Romania versiunea Expert a softului de diagnoza OBD2 moDiag, cu interfata in limba romana.

Detalii...

FORmiDable 2.03

A fost lansata versiunea 2.03 a softului FORmiDable.

Detalii...

Echipamente si scule service

Termometru digital pentru verificare A/C

Termometru digital pentru verificare A/C

Cod produs: ADD802

Produsul este disponibil

Mini termometru digital pentru verificarea functionarii instalatiei A/C a automobilului.

Pret (TVA inclus): 65,00RON

Informatii suplimentare

Asistenta online

Functionalitati
·Functie de afisare in grade Celsius si Fahrenheit:
·Functie de HOLD pentru a retine temperatura masurata.
Measure Procedure
·Press “ON/OFF” button once to switch ON the thermometer
	it will perform a self-test with a flash of full segment display
	and jump to normal display
·Take out the plastic probe cover, then penetrate the stainless steelprobe into test substance
	about 25mm(1″)to get the reading when it become stable
·Press “ON/OFF” button once to switch OFF the thermometer
Specifications
·Automatic power off after 10 minutes
·Measurement range: -50 to +200℃/-58 to +392
·Accuracy:between -50 to 200℃(-58 to +392℉),otherwise, more than ±2℃(±4℉)
·Resolution:0.1°between -19.9°to 199.9°,otherwise 1°
·Sampling Rate:1 second
·Battery: 1pc×1.5 volt type LR44 or equivalent Probe size:125mm(L)
·Ambient temperature:-10 to 50℃/ +14 to 122℉
Battry Replacement
·Open the battery cover by swirling anti-clockwise, replace the battery
	then close the battery cover tightly by swirling clockwise
Note
·Not to be used inside an oven or microwave oven
·Not to be used the probe cover to stir at high temperature substance