Opel Scanner CAN 2.0.1.22
Version 2.0.1.22 changelog:
Added:
- New Licensing System
- Coding Index programming on MID Omega B MY94-97
- Coding Index programming on MID CART Vectra B
- EEPROM write on MID Vectra-B MY96+
- EEPROM write on MID Omega-B MY98+
- Range Calibration on MID Omega B
- Configuration coding on MID CART Vectra B
- Z32SE V6 engine support on Antara/Captiva
- Add-On-Heater support on Vectra C
- "Overrun Counter Reset", "Start Counter Reset", "High Voltage Counter Reset" on Add-On-Heater Vectra C
- DPF-related parameters to MultiJetCAN with DPF
- "Replace Differential Pressure Sensor", "Replace Precatalyst", "Replace Diesel Particulate Filter" on MultiJetCAN
- EPS calibration on Meriva
- ECU ID on Instrument Corsa C 2008
- ECU ID MTA Easytronic, Corsa C
- ECU ID EDC16 Zafira B
- Additional Status info on CAN ECU trouble codes
- MTA Magnetti Marelly, Trouble Codes and Live Parameter data
- Immo related parameters on EDC16
- Introduced 2011/2012 year in the software
Fixed:
- TC on MID OAG CART
- TC on MultiJetCAN, Z13DTJ
- Livedata request on MultiJetCAN, Z13DTx
- Autodetect of MultiJetCAN, Z13DTx
- "Actual Injection Start" calculation on DEC30
- Injector test on DEC30
- Trouble Code delete on Astra J/Insignia
- Livedata request from DECE1C (Z17DTH)
- Injector coding on EDC16 Z19DTH
- Parameters calculation on EDC16
- Identification on CAN Engine ECUs
- CAN ECU TC status definition
- TC display on DEC30
- TC symptoms for ABS, TPMS, Lighting, CDLS, Easytronic KWP, EDC16, Simtec 71.5
Procedura :
Utilizatorul poate inregistra software-ul pe cel mult trei calculatoare, solicitarile de licente suplimentare se primesc doar cu acordul producatorului.Limba selectata in program la activare ramane aceeasi pe toata durata utilizarii programului, nu poate fi schimbata, de ex. alegeti Romana / Engleza . Software-ul nu va putea fi folosit cu alta interfata decat aceea care a fost conectata la calculator atunci cand s-a activat programul. O alta licenta nu va fi furnizata daca utilizatorul o solicita folosind o alta adresa de email decat cea folosita initial la activare.
Pentru a activa programul, cu calculatorul conectat la internet, conectati interfata la portul usb, mergeti in meniu la sectiunea Help - Register ,se va deschide o casuta de dialog unde veti introduce numele si adresa de email (este foarte important sa verificati ca ati introdus corect datele !!! ) , apoi apasati Register. Daca totul a decurs bine, in cateva secunde veti primi un mesaj de confirmare si software-ul va functiona. De asemeni, pe adresa de email furnizata veti primi un mail de confirmare ce va contine licenta dvs. pentru a o avea in rezerva in caz ca se intampla ceva cu cea originala. Pentru a folosi in viitor licenta de rezerva nu trebuie decat sa schimbati extensia din .txt in .reg si apoi dublu-click pe acest fisier.
Mai jos este procedura in limba engleza de pe site-ul producatorului .
Attention!
Starting this release our software will require valid license to work.
Key points of the licensing:
1. User can register the software on up to 3 different computers. All requests to provide additional license in cases of HW update/change will be processed individually with right to denial of additional license provision.
2. User can not change the software language once he registered. It means, that once user registered Russian/English version, can not work with Danish/English. So, be careful and make sure, you are running correct language version first time!
3. User can not use the software with the interface ID, other then the one, he registered initially.
4. License will not be provided, if user will try to register copy with e-mail address, other, then the one, he registered initially.
Registration procedure, online method (if your PC is connected to Internet):
Please note - license will be generated only for the PC you are running registration.
1. Start software.
2. Plug in the interface.
3. Go to menu Help -> Register.
4. Dialog will appear to enter User name and e-mail address. It is very important to provide real and valid info.
5. Make sure information is correct and press button - Register!
6. If everything went smoothly, in a few seconds you will get a message about successful registration and you software copy will start to work.
7. Also on your above specified e-mail address will be sent a message with file. This file will contain backup of your license, just for case, if for reasons. If your license is damaged for some reasons, you can always restore it by changing the .txt to .reg and doubleclicking on this reg file.
Registration procedure, offline method (if your PC is NOT connected to Internet):
1. Start software on the PC, where you are planning to use the software.
2. Plug in the interface.
3. Go to menu Help -> Register.
4. Dialog will appear to enter User name and e-mail address. It is very important to provide real and valid info.
5. Make sure information is correct and press button - Register!
6. In the folder, where software resides, will appear text file, containing your license request data
7. Send this file on info@opel-scanner.com, asking to generate a license for this code.
8. You will receive an e-mail message, containing license in a txt file. Save on your local disk, rename to .reg and doubleclick on it. License will be stored on your PC and software will start to work.
_______________________________
This version is available only through internet update and only from 2.0.1.18 or later versions.
Initial executable file name must be like AutoScannerOpelCAN_XX.exe, where XX - language version, see table below:
For English/Russian - RU
Danish - DA
German - GE
Czech - CZ
Dutch - DU
Hungarian - HU
Romanian - RO
Driver can be found here: http://opel-scanner.ru/files/driver_OpelScanCAN.zip
